Hot-Melt Series
Fokis PW700 Hot Melt Adhesive Pellets for Edge Banding and Profile Wrapping
Model: Fokis-PW700
Fokis PW700 hot melt adhesive pellets is an EVA-based hot melt adhesive developed for furniture edge banding, profile wrapping, and panel furniture production. It is designed for manufacturers who need stable melting performance, smooth application, good initial tack, and reliable bonding on wood-based materials.
With low viscosity, good liquidity, and long opening time, Fokis PW700 helps support continuous production on semi-automatic edge banding machines, manual machines, and profile wrapping machines. It is suitable for solid wood line, particleboard, MDF, decorative paper, wood veneer, and related furniture panel materials.
PW700 is supplied in light yellow granule form and is normally packed in 25kg/bag. It is suitable for furniture factories, panel processors, woodworking material suppliers, and adhesive distributors looking for a practical hot melt adhesive granule solution.
Hot Melt Adhesive Granules Applications
Fokis PW700 is designed for woodworking and furniture manufacturing processes that require fast application, stable melting, and reliable bonding performance.
Edge Banding for Panel Furniture: Fokis PW700 can be used in edge banding processes for panel furniture production. It is suitable for bonding edge materials to wood-based boards such as particleboard, plywood, MDF, HDF, and other furniture panels.
MDF and Particleboard Processing: For MDF, particleboard, and shaving board applications, Fokis PW700 provides a practical hot melt adhesive option for furniture factories and board processing workshops.
Profile Wrapping: PW700 is also suitable for profile wrapping applications, especially where decorative paper, wood veneer, and wood-based profiles need consistent adhesive coverage and stable bonding during production.
Decorative Paper and Wood Veneer Bonding: PW700 can support decorative paper and veneer bonding processes where smooth coating, film toughness, and good thermal stability are required.
Semi-Automatic and Manual Machine Use: Fokis PW700 is suitable for semi-automatic edge banding machines, manual machines, and profile wrapping machines, making it flexible for different workshop conditions.
Technical Properties of Fokis PW700
Fokis PW700 as an EVA-based hot melt adhesive pellets with light yellow appearance, 100% solid content, viscosity of approximately 30000 – 40000 mPa·s at 200℃, and softening point of 75±5℃.
| Product Type | Hot Melt Adhesive Granules |
|---|---|
| Base Material | EVA / Synthetic Resin |
| Appearance | Granule |
| Color | Light Yellow |
| Toxicity | Non-toxic |
| Solid Content | 100% |
| Viscosity | Approx. 30000 – 40000 mPa·s at 200℃ |
| Softening Point | 75 ± 5℃ |
| Proportion | 1 ± 0.1 |
| Normal Package | 25kg / bag |
Recommended Construction Conditions
For stable bonding performance, production conditions should be adjusted according to material type, machine setting, ambient temperature, and actual line speed.
| Material Moisture Content | 8% – 10% |
|---|---|
| Room & Material Temperature | >15℃ |
| Adhesive Tank Temperature | 180℃ – 200℃ |
| Adhesive Wheel Temperature | 160℃ – 180℃ |
| Feeding Speed | >10 m/min |
| Forcing Pressure | 3 – 5 kg/cm² |
| Application Quantity | 40 – 100 g/m² |
Note: The recommended conditions should be adjusted according to material type, machine setting, ambient temperature, production speed, and actual bonding test results.
Safety & Handling Instructions
Fokis PW700 remains stable for 12 months when stored in sealed containers at 23℃. Storage temperatures higher than 35℃ or lower than 4℃ should be avoided. Keep containers closed when not in use.
For best results, store the product in a clean, dry, and well-ventilated warehouse. Avoid direct sunlight, excessive heat, moisture, and contamination during storage and handling.
Why Choose Fokis?
- EVA-Based Formula for Furniture Production
- Low Viscosity and Good Liquidity
- Long Opening Time
- Strong Initial Viscosity
- Good Thermal Stability
- Suitable for Different Machines
Need Hot Melt Adhesive Pellets for Furniture Production?
FAQ
What is Fokis PW700 hot melt adhesive granule used for?
Fokis PW700 hot melt adhesive granule is used for furniture edge banding, profile wrapping, panel furniture production, decorative paper bonding, wood veneer bonding, and wood-based board processing.
Is Fokis PW700 suitable for edge banding machines?
Yes. PW700 is suitable for semi-automatic edge banding machines, manual machines, and profile wrapping machines.
What materials can PW700 bond?
PW700 is suitable for solid wood line, shaving board, MDF, decorative paper, wood veneer, particleboard, plywood, and related furniture panel materials.
What is the recommended adhesive tank temperature for PW700?
The recommended adhesive tank temperature is 180℃–200℃, while the adhesive wheel temperature is 160℃–180℃.
What is the package size of Fokis PW700?
The normal package is 25kg/bag. Special packaging requirements can be discussed with the sales representative.
How should Fokis PW700 be stored?
Store PW700 in sealed containers at around 23℃. Avoid temperatures higher than 35℃ or lower than 4℃, and keep containers closed when not in use.